Diamond Blades – Do’s and Don’ts

Using Gemstone Blades correctly is critical to assembling your project revenue. And a few hacks can surely help you to get the best performance from your Gem Blades. Below are a few do’s and don’ts that may help in keeping your Blades, without hampering its performance.

Use the Right Blade for the work.

While Diamond Blades can perform a variety of cutting tasks on a range of surface materials, these are engineered with a specific relationship matrix that is different for every request. That is to ensure that the Blade is maintained much longer and performs well regularly.

Consider these questions before buying a Gem Blade:

What material are you reducing?
Is it going to be always a Damp or Dry cutting?
Which kind of lowering equipment will you be using?
How much slicing will be achieved?
Use a Wet Blade Only When Wet

Wet Cutting Gem Blades shouldn’t be used for Dry clipping. This may fry and warp the Blade, or worse could rest apart and cause serious injuries. Normal water or liquid coolants also allow correct cutting while working on floors like concrete, asphalt, and granite. Even Dry Blades can be utilized Wet; doing this might increase the life and performance of the Gem Blade.

Use Moist Blades when:

Using walk-behind saws
Making deep cuts
Lowering expansion joints in cured concrete
In the event face masks, respirators are unavailable
The website can manage the slurry from the cutting
Chopping ceramic, porcelain, brick, pavers, and block
Use Dry Blades when:

Using an electric saw OX Tools
Intermittent cutting that allows the Blade to cool
For decorative or other exact, shallow cuts
Don’t Bury the Blade

Avoid burying the Blade completely to the flange, or forcing the Blade through the material being cut. This may wear-out the Blade or cause irreparable damage. Burying the Gem Blade all the way into the lowering material could heat the material within the Diamonds Rim, triggering the Blades to go dull and finally will stop reducing. Instead choose the step lowering technique, that involves making several smaller incisions to complete the trim.

Don’t Tension the Blade

Any equipment can fail if it’s pushed beyond its operating limits and Gem Blades are no exception. Enhance the life of your Blade by not driving it too hard, to be able to complete the job faster, else you may end up reducing a deeper hole in your structure budget or delays in concluding the project.

Don’t Support the Blade Incorrectly

Spinning a Diamond Blade in the wrong direction might seem to be as if it’s cutting, however in the process will lose its sharpness and wear quickly. Always make reference to the guidelines stated on the lowering Blade before mounting it onto the device. Second, run the Gem Blade at the given speed with NO Insert for at least one minute to evaluate for just about any issues.

Gemstone Blades are a complete necessity in today’s development projects and by following these simple yet important to-dos, you can increase the life of your trimming tool, this means fewer replacements, and ensuring an increased value for your investment.